![\"\"](\"http:\/\/www.dailylife.barrowroad.com\/wp-content\/uploads\/2023\/01\/Day2302200a.jpg\")
<\/a><\/p>\nI ordered this pop up power strip from Amazon:<\/p>\n
XBA Automatic Pop up Power Strip with Wireless Charger<\/span><\/a>\u00a0<\/span><\/p>\n I also had to order a four inch hole saw.\u00a0 Mine only went to half that size.<\/p>\n Out of the box.\u00a0 It is a simple “plug in to an outlet”.<\/p>\n The hole will be in the upper right corner.<\/p>\n I drilled a pilot hole from the bottom, where I spaced the hole to have proper clearance.\u00a0 I used the hole saw to score the bottom of the countertop, then I drilled from the top.<\/p>\n Of course, somewhere in there I forgot about the sawdust…this is after I brushed off.<\/p>\n The hole was clean on both sides.<\/p>\n Here it is hanging down.<\/p>\n A plastic collar threads on from underneath and tightens the power strip in place.<\/p>\n Here it is plugged in.\u00a0 Fortunately there is even a GFI outlet in the compartment that the fridge and ice maker plugged into!\u00a0 I need to get something to hold the power cord up and out of the way.\u00a0 It is just long enough to do that with.<\/p>\n The finished project!<\/p>\n If you look closely it is charging the phone.<\/p>\n And popped up, there are three 120v outlets, and two USB ports.\u00a0 As well as the wireless charging station on the top.\u00a0 It all took about an hour, mainly because I was not in a hurry.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n